Vertiv UPS Products — Liebert Service & Battery Replacement Canada

Vertiv UPS service across Canada — full Liebert and Vertiv catalog. Liebert PSI, GXT, APS, NXC, APM plus Vertiv EXM and ITA. Battery replacement, repair, preventive maintenance. Quote in one business day.

Independent UPS Services Canada services the complete Vertiv UPS catalog — formerly sold as Liebert — across every Canadian province. Hospital essential-electrical rooms, federal and provincial data centres, Tier-1 bank trading floors, telecom central offices, Crown corporation command centres and industrial control systems across the country run on Liebert PSI, GXT, APS, NXC and APM platforms, plus the current-generation Vertiv EXM and ITA lines. We replace batteries, repair faults, run preventive maintenance contracts and plan migrations on every model in the line.

Most Canadian buyers still say “Liebert” when they mean Vertiv. The brand was acquired from Emerson Network Power in 2016, and the Liebert nameplate stayed on tens of thousands of installed units across Canada — many still under load today, many well past their original manufacturer support window. Whether your asset tag reads Liebert or Vertiv, this is the right page. We work on both.

Vertiv / Liebert UPS families we service

Liebert PSI — 1.0 to 3.0 kVA line-interactive

Compact 1U and 2U rack line-interactive UPS with automatic voltage regulation. Found in branch offices, small server rooms, edge IT cabinets, healthcare patient-monitoring rooms and retail back-of-house. The PSI 3-1500 and similar SKUs are now end-of-life from Vertiv — we keep them running with replacement battery packs and provide migration paths to the current Vertiv ITA platform when the chassis itself reaches end-of-service.

Liebert GXT — 1.0 to 10 kVA online double conversion

True online double-conversion with a sinewave output and standard SNMP network management. The Liebert GXT5 and earlier GXT3/GXT4 generations are the most common online UPS we see in lab equipment rooms, medical imaging modalities, broadcast control rooms, financial back-office racks and bilingual call-centre infrastructure. We supply replacement battery packs across the GXT generations and replace failed power modules where parts remain available.

Liebert APS — 5 to 20 kVA modular single-cabinet

Modular UPS with hot-swap battery cabinets and field-upgradeable power modules. Built for mid-tier data centres, telecom edge POPs, mobile-network MSC backup and provincial-government secondary IT rooms. Capacity scaling from 5 kVA up to 20 kVA without forklifting the cabinet — and a common upgrade path is APS to Liebert APM when load growth pushes past 20 kVA.

Liebert NXC — 10 to 200 kVA three-phase tower

The mainstream enterprise three-phase UPS for Canadian hospitals, federal data centres, mid-sized colocation suites and Crown-corporation IT infrastructure. NXC inherits the Liebert NX lineage and remains under load in essential-electrical rooms coast to coast. Battery string replacement, capacitor service, fan and control-board work all in our wheelhouse. New deployments and capacity upgrades typically move to the current-generation Vertiv EXM platform.

Liebert APM — 30 to 300 kVA modular three-phase

Hot-swap modular three-phase UPS designed for Tier III and Tier IV data centres, hyperscale edge sites, financial-services primary data halls and high-availability healthcare environments. Power modules and battery modules swap under load without dropping the protected bus. We service the full APM range including paralleled N+1 and 2N configurations.

Vertiv EXM — 10 to 200 kVA current-generation three-phase

The successor to Liebert NXC. ECO mode for high efficiency, optional lithium-ion battery cabinets, smaller footprint, expanded remote-monitoring options. New three-phase builds in Canadian data centres now ship as EXM — and the NX → NXC → EXM lineage is well-trodden when refreshing legacy rooms.

Vertiv ITA — 1 to 20 kVA online rack

Current-generation online rack UPS with optional lithium-ion batteries. 2U, 3U and 4U form factors. The standard modernization target for end-of-life Liebert PSI 3-1500 and aging GXT3 installs — same rack footprint, longer battery service life, current SNMP card support.

Battery replacement across the Vertiv / Liebert range

Every Vertiv UPS needs battery service on a defined cycle — typically every three to five years for sealed lead-acid chemistry, eight to ten years for lithium-ion where deployed. We supply specification-matched replacement battery packs and battery cabinets for the full catalog and perform on-site swaps with old-battery disposal certificates for facility audit files. See our Vertiv UPS battery replacement page for the catalog and procedure.

Common deployment contexts in Canada

  • Healthcare — hospital essential-electrical rooms, MRI and CT modality protection, patient-monitoring carts, pharmacy refrigeration backup, EHR application servers. Liebert is the dominant installed base in Canadian Health Authority and CIUSSS environments.
  • Federal and provincial government — Shared Services Canada data centres, provincial IT corporations, command centres and 911 dispatch, court-system server rooms, public-safety radio infrastructure.
  • Telecommunications — cell-tower huts, fibre POPs, ISP head-ends, MSC backup, edge compute for content delivery.
  • Finance — Tier-1 bank trading floors, regional credit-union data centres, payment processing infrastructure, ATM-network protection.
  • Industrial and manufacturing — PLC and DCS protection, SCADA control rooms, automated production lines, oil-and-gas remote facilities, pulp-and-paper plant control.
  • Higher education and research — university data centres, research-lab instrument backup, supercomputing edge nodes.

End-of-life and migration support

Vertiv has formally retired several Liebert generations from factory service. Where you stand:

  • Liebert NX → Liebert NXC → Vertiv EXM — the three-phase enterprise lineage. We still service NX and NXC where parts remain, and plan EXM migrations when the chassis is overdue.
  • Liebert PSI 3-1500 → Vertiv ITA — same form factor, longer battery life with the lithium-ion option, current SNMP card.
  • Liebert APS → Liebert APM — when load growth pushes past 20 kVA or the room consolidates onto a single modular footprint.
  • Liebert GXT3 / GXT4 → Liebert GXT5 or Vertiv ITA — depending on whether you want online double-conversion with the same rack footprint or a step into lithium-ion.

Service options on every Vertiv UPS

Quote a Vertiv / Liebert service

Email your model number and serial — Liebert or Vertiv — to Email Us or call 1 (438) 881-3363. Quote back within one business day. We cover every Canadian province from our Quebec dispatch hub.

Independent service provider

Independent UPS Services Canada is an independent UPS service company — not affiliated with Vertiv Group Corp. or Emerson Network Power. The Liebert and Vertiv trademarks remain property of their respective owners.

Related Vertiv UPS resources