Vertiv Liebert GXT3 1000VA UPS, Mini-Tower Model, UL/c-UL Listed, 120VAC (GXT3-1000MT120) – 2U Tower – 3 Hour Recharge – 5 Minute Stand-by – 120 V AC Input – 127 V AC, 127 V AC, 115 V AC, 127 V AC Output – USB – 6 x NEMA 5-15R – SNMP Manageable

Description

Vertiv Liebert GXT3 1000VA UPS, Mini-Tower Model, UL/c-UL Listed, 120VAC GXT3-1000MT120 – 2U Tower – 3 Hour Recharge – 5 Minute Stand-by – 120 V AC Input – 127 V AC, 127 V AC, 115 V AC, 127 V AC Output – USB – 6 x NEMA 5-15R – SNMP Manageable — Replacement Battery

The Liebert GXT3 1000VA UPS, Mini-Tower Model, UL/c-UL Listed, 120VAC GXT3-1000MT120 – 2U Tower – 3 Hour Recharge – 5 Minute Stand-by – 120 V AC Input – 127 V AC, 127 V AC, 115 V AC, 127 V AC Output – USB – 6 x NEMA 5-15R – SNMP Manageable runs on a serviceable battery system that requires periodic replacement. This pack is built to the original equipment specification and tested to factory tolerances.

Fits These UPS Units

• Vertiv Liebert GXT3 1000VA UPS, Mini-Tower Model, UL/c-UL Listed, 120VAC GXT3-1000MT120 – 2U Tower – 3 Hour Recharge – 5 Minute Stand-by – 120 V AC Input – 127 V AC, 127 V AC, 115 V AC, 127 V AC Output – USB – 6 x NEMA 5-15R – SNMP Manageable

UPS Specifications

• Chemistry: Valve-regulated sealed lead-acid (VRLA), maintenance-free
• Discharge profile: High-rate, optimised for short-duration backup loads
• Self-discharge: Low — holds charge through extended standby periods
• Vibration tolerance: Rated for rack-mount installation
• Construction: Sealed, spill-proof case

Certifications & Quality

• U.L. Recognized and CE Certified
• Brand new — factory-sealed, never used
• Quality-tested for capacity and internal resistance
• manufacturer warranty included

What You Receive

• One Vertiv UPS unit for the Vertiv Liebert GXT3 1000VA UPS, Mini-Tower Model, UL/c-UL Listed, 120VAC GXT3-1000MT120 – 2U Tower – 3 Hour Recharge – 5 Minute Stand-by – 120 V AC Input – 127 V AC, 127 V AC, 115 V AC, 127 V AC Output – USB – 6 x NEMA 5-15R – SNMP Manageable
• Installation guidance (see below)

Installation

Installation procedure: isolate output, transfer load to bypass if available, then disconnect the depleted pack and seat the replacement. Always verify load behaviour during the cutover.

Backed by Vertiv manufacturer warranty + nationwide service support

Ships nationwide from our Quebec depot · Email Us

Independent Canadian Vertiv / Liebert UPS service specialists since 2012.